Datsun 1600 Radiator kit FJ20ET CRK1620

Complete radiator kit FJ20ET

Custom radiator 520 x 400 x35 with 1600CFM 16" Spal thermo fan with thermo switch and loom.
Large enough to cool the hottest FJ. Includes rubber radiator mounts & intercooler lower mount.
Stainless cap screw & washer for the lower mounting plate are included.

Once fitted the radiator assembly complete with fan can be removed in minutes. Simply undo the radiator hoses, unplug the thermo switch, loosen the 2 top cotton reel mounting bolts and lift the radiator assembly up and out.

fj radiator

Radiator fan assembly

The large 520x400x35 radiator has an inbuilt over flow tank. The rad is supplied fully assembled.
The 16" spal slimline high performance thermo fan is switched by a thermo switch mounted on
the inlet tank.
Thermo switch turns on at 92c and off at 87c. The polished top plate sits 6mm above the front lip on the radiator
support panel so that high pressure air trapped at this point flows through the top cores of the radiator.
The thick alloy cover plate also contributes to cooling by absorbing and dissipating heat.

fj inlet

Close up of radiator inlet
Billet filler cap & angled outlet for FJ configuration.